Hercules Version 3: System Messages: RD - Card Reader Emulation

This page describes the card reader emulation messages for the Hercules S/370, ESA/390, and z/Architecture emulator.

Messages

HHCRD001E Out of memory
Meaning
A request to allocate memory for the list of files to be read failed.
Issued by
cardrdr.c, function cardrdr_init_handler
HHCRD002E File name too long (max=max): "filename"
Meaning
The file name specified by filename is too long. The maximum length is max.
Action
Specify a shorter name.
Issued by
cardrdr.c, function cardrdr_init_handler
HHCRD003E Unable to access file "filename": error
Meaning
The file specified by filename could not be accessed. The error is described by error.
Action
Correct the error and retry the operation.
Issued by
cardrdr.c, function cardrdr_init_handler
HHCRD004E Out of memory
Meaning
A request to allocate memory for the list of files to be read failed.
Issued by
cardrdr.c, function cardrdr_init_handler
HHCRD005E Specify 'ascii' or 'ebcdic' (or neither) but not both
Meaning
Both of the character set translation options ascii and ebcdic were specified. At most one is allowed.
Action
Select only one character set translation option.
Issued by
cardrdr.c, function cardrdr_init_handler
HHCRD006E Only one filename (sock_spec) allowed for socket devices
Meaning
More than one filename argument was given for a socket card reader device. Only one is allowed. This error can also result if an option name is misspelled.
Action
Remove the extraneous filenames, or correct the misspelled options.
Issued by
cardrdr.c, function cardrdr_init_handler
HHCRD007I Defaulting to 'ascii' for socket device address
Meaning
The socket card reader device at address address has been set to ASCII mode, since neither translation option was specified. The socket card reader device cannot automatically select the translation option.
Action
If you wish to read cards without translation from ASCII to EBCDIC, you must specify the ebcdic option on the reader definition.
Issued by
cardrdr.c, function cardrdr_init_handler
HHCRD008W 'multifile' option ignored: only one file specified
Meaning
Only one file was specified for input to the card reader, and the multifile option was specified. This option is meaningless with only one input file. The option has been ignored.
Action
If you wish to read more than one input file without signalling end-of-file or intervention required between them, they must all be specified on the same reader definition. If you only wish to process one file, omit the multifile option.
Issued by
cardrdr.c, function cardrdr_init_handler
HHCRD009E File name too long (max=max): "filename"
Meaning
The file name specified by filename is too long. The maximum length is max.
Action
Specify a shorter name.
Issued by
cardrdr.c, function cardrdr_init_handler
HHCRD010E Unable to access file "filename": error
Meaning
The file specified by filename could not be accessed. The error is described by error.
Action
Correct the error and retry the operation.
Issued by
cardrdr.c, function cardrdr_init_handler
HHCRD011E Close error on file "filename": error
Meaning
An attempt to close the file specified by filename failed. The error is described by error.
Action
Correct the error and retry the operation.
Issued by
cardrdr.c, function cardrdr_close_device
HHCRD012I ipaddr (hostname) disconnected from device address (socketspec)
Meaning
The client on the host named hostname, with the IP address ipaddr, has disconnected from the socket card reader device at address address, specified by socketspec.
Issued by
cardrdr.c, function cardrdr_close_device
HHCRD013E Error opening file filename: error
Meaning
The file named filename could not be opened for reading. The error is described by error.
Action
Correct the error and retry the operation.
Issued by
cardrdr.c, function open_cardrdr
HHCRD014E Error reading file filename: error
Meaning
An error was encountered while attempting to read the first 160 bytes of the file named filename in order to determine its character set. The error is described by error.
Action
Correct the error and retry the operation.
Issued by
cardrdr.c, function open_cardrdr
HHCRD015E Seek error in file filename: error
Meaning
An error was encountered while attempting to return to the beginnning of file named filename after determining its character set. The error is described by error.
Action
Correct the error and retry the operation.
Issued by
cardrdr.c, function open_cardrdr
HHCRD016E Error reading file filename: error
Meaning
An error was encountered while attempting to read an EBCDIC card image from the file named filename. The error is described by error.
Action
Correct the error and retry the operation.
Issued by
cardrdr.c, function read_ebcdic
HHCRD017E Unexpected end of file on filename
Meaning
Too few characters were read from the file named filename. The autopad option was not specified.
Action
Either ensure that all records in the file are 80 bytes long, or specify the autopad option on the reader definition.
Issued by
cardrdr.c, function read_ebcdic
HHCRD018E Error reading file filename: error
Meaning
An error was encountered while attempting to read an ASCII card image from the file named filename. The error is described by error.
Action
Correct the error and retry the operation.
Issued by
cardrdr.c, function read_ascii
HHCRD019E Card image exceeds size bytes in file filename
Meaning
A line in the file named filename is too long to fit on one card. The trunc option was not specified. The maximum length is size bytes.
Action
Either ensure that all lines in the file are less than size bytes long, or specify the trunc option on the reader definition.
Issued by
cardrdr.c, function read_ascii


If you have a question about Hercules, see the Hercules Frequently-Asked Questions page.


back

Last updated $Date$ $Revision$